KRAUS KEF-15003ORB Instruction Manual

INSTALLATION MANUALwww.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.Ventus Double Handle Widespread Basin FaucetK

Step 4: Install drain1. Remove waste stopper (10) from drain (11). Remove drain body (16), mounting nut (15), plastic washer (14), and concave washer

Step 4: (Continued) Step 1 Step 2Step 3 Step4Step5124A4B4C4D31234A4B4C4DATTACH TO HOT ANGLE STOPATTACH TO COLD ANGLE STOP66135659871920211817101112131

Step 5: Flush faucetAfter installing faucet, remove aerator (23) with included aerator key (24). Turn water on for 30 seconds to remove any debris. R

Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective step

Codes/Standards Applicable:KRAUS LIMITED LIFETIME WARRANTYThis product has been manufactured and tested to the highest quality standards by Kraus USA

C. Kraus recommends installing all Kraus products with a licensed, professional plumber. Kraus will not be held responsible for any damage or product

www.kraususa.com

Thank you for purchasing Kraus We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you a

Prior to Installation:• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please cont

Diagram and Parts List234A123244B4C4D5698719202118171011121314152216

Diagram and Parts ListTools you will need:11027910 31/32”Minimum distance 90mmLess than 90mmCold Water32 3/32”Ø35~Ø38123109111213Hexagon NutHotWaterCo

Faucet Installation Procedure Water lineAngle valveWallEmbedded pipe136 mm167mm(6.57)167mm(6.57”)99 mm(3.9”)99 mm(3.9”)(Max450mm)(17.7”)89 mm(3.5)(5.3

Faucet Installation Procedure Water lineAngle valveWallEmbedded pipe136 mm167mm(6.57)167mm(6.57”)99 mm(3.9”)99 mm(3.9”)(Max450mm)(17.7”)89 mm(3.5)(5.3

Step 1: Remove mounting hardware and three-way connectorRemove three-way connector (6) from faucet body (2). Remove mounting screws (4D), mounting nut

Step 3: Connect waterlines to valvesAttach hot waterline (5) to hot handle valve (1) and cold waterline (5) to cold handle valve (3). Hand-tighten. T